Zks Series Electric Vacuum Material Loading Pellet Feeder Handling Equipment

1. The vacuum feeder is a vacuum conveyor that uses an electric vacuum pump as the vacuum source. The vacuum feeder can be used to feed materials directly from the container into the mixer, reactor, hopper, tablet press, packaging machine, and vibrating screen. , granulator, wet granulator, dry granulator and crusher. This machine reduces the labor intensity of workers, eliminates dust pollution, and ensures that production meets "GMP" requirements.

2. The ZKS series vacuum feeder uses a vortex air pump to pump air, so that the inlet of the suction nozzle and the entire system are in a certain negative pressure state. The powder and granular materials are sucked into the feed nozzle along with the outside air, forming a material air flow, and arrive at the suction pipe through the suction pipe. Hopper, in which gas and material are separated. The separated materials enter the receiving equipment. Feeding and discharging are accomplished by continuously opening and closing the pneumatic reversing valve, and the opening and closing of the pneumatic reversing valve is controlled by the control center.

3. The vacuum feeder is equipped with a compressed air backflush device. Each time the material is discharged, the compressed air pulses backflush the filter to knock down the powder adsorbed on the filter surface to ensure the normal operation of the suction material.

4. For the vacuum feeder with material level control, the material in the hopper of the receiving equipment completes automatic feeding through the material level meter. When the hopper of the material receiving equipment is higher than a certain position, the vacuum feeder stops and enters the standby state; when the material level is lower than a certain position, the vacuum feeder starts automatically to complete the feeding of the material receiving equipment.